The EC-RC range of phone remote resetters are designed to be used in a wide range of applications where the remote control of any device is necessary.
The EC-RC4F will control up to 4 devices independently and uses the fixed PSTN phone network (analogue line) while the EC-RC4FG also has a built in GSM gateway which enables you to simply add a SIM card and use the unit anywhere there is a mobile phone signal.
Use the range of resetters where:
– You need to remotely control or reboot any device.
– You need to be able to remotely turn on/off a device (Office, automation, etc…)
– you need to remotely control a device where there is no fixed phone line available.
The EC-RC4FD is a variant that has Sub-D relay connectors on the rear instead of the standard IEC mains connectors for applications where direct relay contacts are required.
The EC-RC4F connects directly to an analogue telephone line (POTS) and when you dial it, the unit will ask you for a password and then you are able, via DTMF tones on any phone, to switch on/off or reboot any device connected to any of its 4 channels independently. It is powered directly from the mains (230vAC) and the device to be remote controlled is connected via the dual IEC connectors. It operates in a ‘fail safe’ mode as the power to the unit to be controlled is separate from the EC-RC4F power supply and in the event of a power cut, will return to it´s ‘ON’ position. In an unlikely event of a failure of the EC-RC4F, the device connected with also revert to its ‘fail safe’ ‘ON’ position.
This unit is also controllable from any PC (that has a modem) via our custom built software.
Also available is the GSM Gateway in situations where there is no fixed landline available, this allows the unit to be used anywhere where there is a GSM signal available.