Facebook Twitter E-mail RSS
magnify
Home Hardware EC-RC4FD – Remote Resetter

EC-RC4FD – Remote Resetter

The EC-RC range of phone remote resetters are designed to be used in a wide range of applications where the remote control of any device is necessary.

The EC-RC4FD will control up to 4 devices independantly using the fixed PSTN phone network (analogue line). The EC-RC4FD is a variant that has Sub-D relay connectors on the rear instead of the standard IEC mains connectors for applications where direct relay contacts are required.

Use the range of resetters where:
– You need to remotely control or reboot any device.
– You need to be able to remotely turn on/off a device (Office, automation, etc…)
– you need to remotely control a device where there is no fixed phone line available.

The EC-RC4FD connects directly to an analogue telephone line (POTS) and when you dial it, the unit will ask you for a password and then you are able, via DTMF tones on any phone, to switch on/off or reboot any device connected to any of its 4 channels independantly. It is powered directly from the mains (230vAC) and the device to be remote controlled is connected via the dual IEC connectors. It operates in a ‘fail safe’ mode as the power to the unit to be controlled is separate from the EC-RC4F power supply and in the event of a power cut, will return to it´s ‘ON’ position. In an unlikely event of a failure of the EC-RC4F, the device connected with also revert to its ‘fail safe’ ‘ON’ position.

This unit is also controllable from any PC (that has a modem) via our custom built software.

Also available is a GSM Gateway in situations where there is no fixed landline available, this allows the unit to be used anywhere where there is a GSM signal available.